Skip to content
IntoInversion
Find your table
IntoInversion
Find your table

Buying assistant

Find the inversion table that fits you

Your height and weight decide which tables you can use at all. What you care about most and what you want to spend decide the order. We match you on the height range and weight limit each maker publishes, and we leave out any table whose numbers we could not check. Only want Teeter? Switch the brand filter and the matcher stays inside the Teeter range.

4 questionsMaker specs onlyHow we research

Four questions

1Your height
2Your weight
Brand optional
3Most important to you
4Your budget

Your match

Answer the four questions and your table appears here.

We check your height and weight against the range each maker publishes, then sort what is left by what you care about most and your budget. This is a product-fit matcher, not medical clearance.

8 tables in the running

Inversion Table Height and Weight Chart

Every table below is listed with the user height range and weight limit its maker publishes. The chart is built from the same specs the matcher above reads, so the two always agree.

TableUser heightWeight limitBrand
Teeter DEX II4'8" to 6'6"350 lbTeeter
Teeter FitSpine X14'8" to 6'6"300 lbTeeter
TEETER Enjoy a Relaxing Inversion Experience with the FitSpine X3 Inversion Table and Luxury Heat and Vibration Comfort Cushion.4'8" to 6'6"300 lbTeeter
Teeter FitSpine X34'8" to 6'6"300 lbTeeter
Teeter FitSpine LX94'8" to 6'6"300 lbTeeter
Innova ITX96004'10" to 6'6"300 lbInnova
Innova ITM59004'10" to 6'6"300 lbInnova
Innova ITM60004'10" to 6'6"300 lbInnova
Innova ITX96884'10" to 6'6"300 lbInnova

For anyone near the top of the weight column, our guide toinversion tables for big and tall people and the page on 400 lb capacity inversion tables go through what is and is not published. The full Teeter range is in ourTeeter inversion table reviews.

Is there an inversion table suitable for a 300-pound person?

Yes, though the margin is thin. Teeter rates its FitSpine tables to 300 lb, and Innova's ITM and ITX9600 models carry the same rating, so a 300-pound user sits exactly on the limit. Pick the table with room to spare if you can: the Innova ITX1200 and the Teeter DEX II are both rated higher in the chart above. Enter your weight in the matcher and it shows only the tables whose published limit covers it.

How much weight can an inversion table support?

It depends on the maker, and the number to trust is the one on the maker's own spec sheet. The chart above shows the limit for each table we verified. Capacities above that appear in marketplace titles, but a title is not a spec: check the maker's page before you rely on one, and read the limit as the most the frame is rated to hold, not a target.

How to Find the Best Inversion Table for You

The tool above does the matching, but the logic is simple enough to check by hand. Four things decide it, and the first two rule tables out before price or features come into it.

Weight Limit: Start With the Maker's Number

Most Teeter and Innova tables are rated to 300 lb by their makers. The Innova ITX1200 is rated to 350 lb, the highest capacity we have verified with a manufacturer, and YOLEO recommends its Heavy Duty for people up to 265 lb, a figure that comes from its listing alone. Capacities of 400 lb and above do appear in marketplace titles, but we have not found a maker who publishes one; our page oninversion tables with a 400 lb capacity shows where each of those claims leads. If you are close to a limit, pick the table with room to spare: it holds your whole weight by the ankles.

Height Range: What Size Inversion Table You Need

You don't choose a size. Every table adjusts to your height on its main shaft, so the question is whether you fall inside the range its maker publishes. Teeter's tables start at 4'8", Innova's at 4'10", and 6'6" is the top of the range on every table we have checked. If you are near the top of either scale, our guide toinversion tables for big and tall people goes through the fit in detail.

Room Around the Table

A table takes more floor space in use than it does folded, because it swings through a long arc. Innova's manual asks for at least 2 feet on each side and 3 feet in front and behind, which is a sensible minimum for any model. Measure the spot before you order, and check the ceiling if you are tall.

What Matters Most to You

Past the numbers, the choice comes down to priorities. Teeter gives its FitSpine tables a five-year warranty and marks the angle on the tether of the X3 and LX9; Innova's tables cost less, carry a one-year warranty, set the angle with a pin whose degrees are in the manual (the ITX9600 starts at 15°), and include heat and massage models. Equal 300 lb ratings do not mean equal strength. Our guide to the best inversion tables compares them by use case, the Innova buying guide covers Innova's range, and our Teeter inversion table reviews cover every FitSpine model.

When a Table Is Not the Right Answer

Some people should not invert without a doctor's approval. High blood pressure, glaucoma, heart disease and pregnancy are all on the makers' caution lists, and our page onwho should not use an inversion table sorts each condition by the evidence behind it. If weak ankles or knees are your concern, theTeeter DEX II holds you at the hips instead. Once your table arrives, our guide on how to use an inversion table walks you through the first session.

Search IntoInversion