Buying guide
Teeter Inversion Tables: Every Current Model Compared, and Which to Buy
By the IntoInversion teamUpdated
- 2 picks
- 24 sources
- 16 min read
We earn from qualifying purchases made through our links.

If you are comparing Teeter inversion tables, the range is smaller than the number of search results suggests. Teeter’s own product sitemap lists four tables for sale today: the FitSpine X1, X3 and LX9, and the EP-560 (Teeter). Around them sit the DEX II, a hip-supported system that is not a table, the P2 back stretcher and the EZ-Up gravity boots. This page lines them all up, says what each one is for, and tells you which to buy.

Our pick for most back pain buyers
Teeter FitSpine X3
The Teeter most back pain buyers should look at first, because its angle tether is marked at 20°, 40° and 60°. Of Teeter’s four current tables, the X1 drops the marked angles and the EP-560 is the only one offered with a heat and vibration cushion.
- Tether marked at 20°, 40° and 60°, set before you get on
- Deluxe EZ-Reach ankle lock with an extra-long handle
- Five-year full warranty, like every current Teeter
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
Maker sourceSpecs from the maker's own product page

Best if getting on and off is hard
Choose it if bending down to your ankles or balancing while you mount is genuinely difficult: the boarding platform is the reason to pay more. Skip it if mounting is easy for you: it adds nothing to capacity, warranty or angle control.
This page compares the Teeter range on the things that actually differ between models: how you set the angle, how the ankle lock closes, what the bed is made of, and how you get on. We did not test these tables, and we may earn a commission when you buy through links on this page; that does not decide which model we point you to.
Every Teeter Model at a Glance
The five products that hold you inverted or hip-supported are in the table below. Capacity, height range and warranty barely move between them; the angle system, the ankle lock and the heat option are where they differ.
| Spec | Teeter FitSpine X1Premium, price tier 3 of 3Maker source | Editor's choice Teeter FitSpine X3Premium, price tier 3 of 3Maker source | Teeter FitSpine LX9Premium, price tier 3 of 3Maker source | Teeter EP-560VPremium, price tier 3 of 3Maker source | Teeter DEX IIPremium, price tier 3 of 3Maker source |
|---|---|---|---|---|---|
| Weight capacity | 300 lb | 300 lb | 300 lb | 300 lb | 350 lbHighest here |
| User height | 4'8" to 6'6" | 4'8" to 6'6" | 4'8" to 6'6" | 4'8" to 6'6" | 4'8" to 6'6" |
| Angle control | Angle tether, no degree marks; full inversion with secure lockout | EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout | EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout | Angle tether, degrees not stated; full inversion with secure lockout | No angle setting: rotates forward to one fixed stop, knees and hips bent at about 90/90 |
| Ankle system | Ergo-Embrace ankle supports, spring-loaded closure, Ankle Comfort Dial | Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure | Deluxe EZ-Reach ankle lock with Ankle Comfort Dial | Ergo-Embrace wrap-around ankle cups, spring-loaded T-pin closure, Ankle Comfort Dial | None: your thighs lock between the leg supports and the lap pad, with no load on the ankles |
| Warranty | 5 years (extension to 10 sold separately) | 5 years (extension to 10 sold separately) | 5 years (extension to 10 sold separately) | 5 years on the table; the heat cushion has its own 1-year warranty | 5 years full (5-year extension sold separately) |
| Heat and massage | None | None | None | Removable Heat & Vibration Comfort Cushion included: six vibration motors, two vibration levels, heat with a 20-minute auto shut-off, mains adapter | None |
| FDA | 510(k) cleared (K162702), Class I device | 510(k) cleared (K162702), Class I device | 510(k) cleared (K162702), Class I device | 510(k) cleared (K162702), Class I device | Manual states Teeter inversion products are FDA-registered as 510(k) devices (brand-wide, no DEX-specific number) |
| Assembly and setup | 85% pre-assembled, BILT app instructions (brand-wide claim) | 85% pre-assembled, BILT app instructions (brand-wide claim) | 85% pre-assembled, BILT app instructions (brand-wide claim) | BILT app 3D assembly instructions | Five steps in the manual, two wrenches and a screwdriver supplied; BILT app instructions |
| Buy | See today's price: Teeter FitSpine X1 on Amazon (opens in a new tab) | See today's price: Teeter FitSpine X3 on Amazon (opens in a new tab) | See today's price: Teeter FitSpine LX9 on Amazon (opens in a new tab) | Not linked | See today's price: Teeter DEX II on Amazon (opens in a new tab) |
Teeter FitSpine X1Maker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- Angle tether, no degree marks; full inversion with secure lockout
- Ankle system
- Ergo-Embrace ankle supports, spring-loaded closure, Ankle Comfort Dial
- Warranty
- 5 years (extension to 10 sold separately)
- Heat and massage
- None
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- 85% pre-assembled, BILT app instructions (brand-wide claim)
Editor's choiceTeeter FitSpine X3Maker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure
- Warranty
- 5 years (extension to 10 sold separately)
- Heat and massage
- None
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- 85% pre-assembled, BILT app instructions (brand-wide claim)
Teeter FitSpine LX9Maker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock with Ankle Comfort Dial
- Warranty
- 5 years (extension to 10 sold separately)
- Heat and massage
- None
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- 85% pre-assembled, BILT app instructions (brand-wide claim)
Teeter EP-560VMaker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- Angle tether, degrees not stated; full inversion with secure lockout
- Ankle system
- Ergo-Embrace wrap-around ankle cups, spring-loaded T-pin closure, Ankle Comfort Dial
- Warranty
- 5 years on the table; the heat cushion has its own 1-year warranty
- Heat and massage
- Removable Heat & Vibration Comfort Cushion included: six vibration motors, two vibration levels, heat with a 20-minute auto shut-off, mains adapter
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- BILT app 3D assembly instructions
Teeter DEX IIMaker source- Weight capacity
- 350 lbHighest here
- User height
- 4'8" to 6'6"
- Angle control
- No angle setting: rotates forward to one fixed stop, knees and hips bent at about 90/90
- Ankle system
- None: your thighs lock between the leg supports and the lap pad, with no load on the ankles
- Warranty
- 5 years full (5-year extension sold separately)
- Heat and massage
- None
- FDA
- Manual states Teeter inversion products are FDA-registered as 510(k) devices (brand-wide, no DEX-specific number)
- Assembly and setup
- Five steps in the manual, two wrenches and a screwdriver supplied; BILT app instructions
Maker source from the maker's own page or manual, not independently testedListing only retail listing, no maker spec sheetNot stated the maker publishes nothing
Two other Teeter products come up in the same searches and are not tables. The P2 back stretcher is a hand-operated traction device you push against while seated or lying down. The EZ-Up gravity boots hook onto a bar and take you straight to full inversion with no angle control. Both have their own pages, because the buying questions are different.
Teeter Inversion Table Weight Limit and Height Range
Teeter’s support center says every Teeter inversion table is rated for users from 4’8” to 6’6” and up to 300 lb (Teeter support center). That covers the X1, X3, LX9 and EP-560, and it matches the older EP-960 manual, which tells you not to use the table if you are over 6’6” or over 300 lb (Teeter EP-960 manual). The numbers are limits, not targets. Do not use a table outside its published range, and note that the same manual warns of structural failure or the head and neck striking the floor.
The DEX II is the one Teeter product rated higher. Teeter lists it for users from 4’8” to 6’6” and up to 350 lb (Teeter DEX II product page). It holds you at the hips and thighs rather than the ankles, so the comparison to a table is only partial.
If you plan to hang from gravity boots, the number to check is the structure you hang from. The EZ-Up boots are rated to 300 lb, but the Chin-Up Rack Teeter sells to use them at home is rated to only 250 lb (Teeter). A gym bar or your own rack is limited by its own rating instead, and Teeter says any bar must be no more than 1.25 inches across (Teeter).
If you weigh more than 300 lb, no Teeter table is rated for you. Our page on the best inversion table with a 400 lb capacity covers the heavier-rated frames and what each one gives up.
The FitSpine Tables: X1, X3 and LX9
The three FitSpine models share a frame family, a weight rating and a warranty. The FlexTech backrest on an 8-point Floating Suspension is common to all three (Teeter). What changes is the tether and the way you reach the ankle lock.
Teeter FitSpine X1
The X1 is the entry point to the FitSpine series. It has Ergo-Embrace ankle supports with a spring-loaded closure and an angle tether you adjust by feel rather than by printed marks (Teeter). It still offers full inversion with a secure lockout, like the rest of the range.
What it gives up is precision. Without degree markings you find your angle by trial, which suits someone who already knows how far they like to go and is less comfortable for a first-time user who wants to start shallow and stay there. Our Teeter FitSpine X1 review goes through the specs and setup in full.
Teeter FitSpine X3
The X3 adds two things over the X1. The first is the EZ-Angle tether, marked at 20°, 40° and 60°, so you can see and set your limit before you lie back. The second is the Deluxe EZ-Reach ankle lock, with an extra-long handle and a micro-adjusting closure, which means less bending to secure your feet.

Long ankle-lock handle, 5-year warrantyMaker source
by TEETER
Best for beginners who want a visible, marked 20 degree limit.
Skip it if bending down to your ankles or balancing while you mount is genuinely difficult: the LX9 adds a raised boarding platform for that.
What the premium over a cheaper table buys is the longer ankle-lock handle, the 5-year warranty against Innova's 1 year, and a tether marked at 20°, 40° and 60°. The Innova ITX9600 also lets you set a limit with a pin whose degrees are listed in its manual, so a marked angle is not exclusive to Teeter.
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
What we like
- Tether marked at 20°, 40° and 60°, set before you get on
- Five-year full warranty, against Innova's one year
- Teeter's tables are FDA 510(k) cleared under K162702
- EZ-Reach ankle lock with an extra-long handle
Keep in mind
- No heat or massage
- No raised boarding platform, unlike the LX9
- Rated to 300 lb, max height 6 ft 6 in
Full specs
- Price range
- Premium
- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
Maker sourceFrom the maker's product page. Not stated means the maker publishes nothing.
We may earn a commission. It never changes what we pick, or the order picks appear in.
These are product settings, not a recommended progression. Follow the current manual and any restrictions given by your clinician.
For most people buying a Teeter because of back pain, those two changes are the whole case for the X3. Teeter’s own user guide tells new users to start with 1 to 2 minute sessions at 20 degrees (Teeter, 2023), and the X3 lets you see that limit on the strap. Our Teeter FitSpine X3 review covers its dimensions, setup and safe use.
Teeter FitSpine LX9
Comparing the two product pages, the LX9 adds an arched frame, a raised boarding platform and a storage caddy to the X3, and the angle tether, ankle lock, rating, warranty and FDA status are the same (Teeter). The platform and arched frame are about the moment of getting on and off: you step up into the ankle lock instead of reaching down to it.

Raised boarding platformMaker source
by TEETER
Best for people who have trouble bending, balancing on one foot or reaching their ankles.
Skip it if getting on and off is easy for you: you would be paying for convenience you won't use.
Same angle system as the X3, plus a boarding platform with an arched frame. Worth the step up only if getting on and off the table is the hard part for you.
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
What we like
- Raised boarding platform and arched frame for getting on and off
- Same 20°, 40° and 60° marked tether as the X3
- Five-year full warranty, with a five-year extension sold separately
- Ships with a Storage Caddy and traction handles on the hinges
Keep in mind
- Otherwise identical to the X3, so you pay for the platform
- Roller hinge setting must match your body weight, per the manual
- No heat or massage
- Rated to 300 lb, max height 6 ft 6 in
Full specs
- Price range
- Premium
- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock with Ankle Comfort Dial
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
Maker sourceFrom the maker's product page. Not stated means the maker publishes nothing.
We may earn a commission. It never changes what we pick, or the order picks appear in.
If you have trouble bending or balancing, that is a real difference. If you don’t, you are paying for convenience you won’t use. The feature-by-feature breakdown is in our Teeter LX9 guide, and our Teeter LX9 vs X3 vs EP-560 page adds the sizes and the heat cushion.
The Other Teeter Models: EP-560V, DEX II, P2 and EZ-Up
Teeter EP-560 and EP-560V
The EP-560 belongs to Teeter’s older ComforTrak series rather than FitSpine. Its bed is the ComforTrak backrest and its ankle system is the Ergo-Embrace support with a T-pin closure, the same style as the X1. Teeter lists it as UL Safety Certified at a 300 lb weight rating, with a five-year warranty (Teeter).
It is also the only current Teeter table sold with heat in the package. Teeter offers the EP-560 with a Heat and Vibration Comfort Cushion, sold on its own as an accessory too (Teeter). One detail before you buy it for the heat: the cushion’s own page lists a one-year warranty, separate from the table’s five years (Teeter). The table, the cushion and the folded size are on our Teeter EP-560 page.
Teeter EP-560VNot linked hereTeeter DEX II
The DEX II is not an inversion table. You stand on the base, thighs between the leg supports and the lap pad, lean forward on the handles and rotate to a single stop. Teeter says your weight is then carried by the hips and thighs with the knees bent, and no load goes through the ankles (Teeter DEX II product page).
That makes it the Teeter to look at if hanging by your ankles is the sticking point. The trade-offs are real. There is no angle setting to start gently at 20 degrees, Teeter’s own comparison says the DEX II has a larger footprint and is often left set up while a table folds away (Teeter, 2026), and the manual asks new users to have a spotter strong enough to lift them (Teeter DEX II manual). A different position is not a safer one by default, so talk to your clinician if you have a diagnosed condition. Read the Teeter DEX II review before you choose it.
Teeter P2 Back Stretcher
The P2 is a hand-operated stretcher: pads on the thighs, rollers behind the knees, and you set the force by how hard you push the handles toward your feet. It has no inversion at all. It suits someone who wants a short, controllable stretch and can stop the instant it feels wrong, and it is the wrong tool if you wanted to hang. We compare it with the other stretchers on our best back stretcher page.
Teeter EZ-Up Gravity Boots
The EZ-Up boots hook onto a bar, and gravity boots put you straight into full inversion with no backrest to limit the angle, as Teeter’s own comparison describes it (Teeter). That is why we treat them as the higher-risk way to invert and point beginners to a table first. The boots, the bar limits and the safer alternatives are on our best gravity boots page.
Teeter also makes a seated cardio machine, the FreeStep recumbent cross trainer, which has nothing to do with inversion; our Teeter FreeStep review compares its three models.
What Each Step Up Actually Buys You
Reading the product pages together, the differences come down to four areas. Everything else is shared.
Angles and Presets
This is the biggest functional difference in the range. The X1 and EP-560 use a plain angle tether: you adjust it, lie back and feel where you stop. The X3 and LX9 print the angles on the strap. That matters most at the start, when you should be inverting shallowly and briefly, and it helps if more than one person uses the table, because each can return to their own setting.
The Ankle System
Every inversion table hangs you by the ankles, so the lock matters most for safety. The authors of a 2021 case series on inversion table falls describe the mechanism plainly: once ankle strength is lost or the foot slips, the user lands on the top of the head, and falls of one or two feet caused cervical spinal cord injuries in their three patients (Jung, 2021). It is three cases, so it tells you the danger is real, not how often it happens.
The X1 and EP-560 use a spring-loaded T-pin closure. The X3 and LX9 use the Deluxe EZ-Reach lock, with a longer handle and finer adjustment. Teeter publishes no failure data for either, so we can’t say one lock is safer. What the EZ-Reach does is reduce how far you have to bend to close it, a small gain for anyone stiff or unsteady.
Bed Technology: FlexTech vs ComforTrak
The three FitSpine tables use the FlexTech backrest, which Teeter says lifts off the frame on an 8-point Floating Suspension to flex as you move (Teeter). The EP-560 uses the older ComforTrak backrest. Nobody has published a comparison of the two beds, so we won’t rank them.
Assembly and What’s in the Box
Teeter’s FitSpine page says its tables arrive 85% pre-assembled, with the rest guided step by step in the BILT app (Teeter). On the X1, Teeter lists the table, the ankle lock system, a Lumbar Bridge, Acupressure Nodes, a headrest pillow and printed instructions (Teeter). The X3 and LX9 swap in the Deluxe EZ-Reach lock.
Discontinued Teeter Models
A few names still turn up in searches and on the used market. None of them is in Teeter’s current range, and we don’t recommend buying a discontinued model new from a third party, because we can’t confirm how long parts will be available.
Teeter Hang Ups
Teeter Hang Ups is the older name of Teeter’s inversion line. People still search for it, but Teeter’s current range is sold as FitSpine and EP, and no Hang Ups table appears on the product sitemap (Teeter). If you are replacing one, pick from the four current tables above by the same questions: how you set the angle, how you reach the ankle lock, and whether you want heat. To identify an old table, find its manual or check a used one, see our guide to Teeter Hang Ups models.
FitSpine X2
The X2, which many older lists still feature, is not in Teeter’s product sitemap, so any ranking that puts it beside current models describes a table Teeter no longer sells (Teeter). Its closest current neighbors are the X1 and X3.
EP-960 and EP-970
Teeter’s EP-970 address now redirects to the general FitSpine page, which lists no EP-970 or EP-960 product (Teeter FitSpine page). The EP-960 did exist: its owner’s manual is dated 2017 (Teeter EP-960 manual). If you are looking at one used, check the ankle lock and the angle tether carefully, since those are the two parts your safety depends on. Our Teeter EP-960 page covers what the manual says and what to check. If you are buying new, the EP-560 is the only EP-series table Teeter still sells.
Is Teeter FDA-Registered? What the FDA Record Shows
This is where Teeter separates itself from most of the market, and where most Teeter inversion table reviews get vague. Here is the record itself.
What K162702 Covers
The FDA cleared Teeter’s manual inversion table through its 510(k) process under number K162702. The application came from STL International, the company behind Teeter, was received on September 28, 2016, and was decided on December 30, 2016 as “Substantially Equivalent.” The device type is “Apparatus, Traction, Non-Powered,” product code HST, regulation 21 CFR 888.5850 (FDA, 2016). The same clearance also names Teeter Gravity Boots and three Teeter decompression devices.
The record names the “Teeter Manual Inversion Table,” not the X1, X3, LX9 or EP-560 individually. So the accurate statement is that Teeter’s inversion tables are 510(k)-cleared under K162702. Any claim that a specific model “was cleared in 2016” goes further than the record does, and the DEX II manual states only a brand-wide FDA registration with no number of its own (Teeter DEX II manual).
What a 510(k) Is, and What It Isn’t
A 510(k) clearance means the FDA accepted that a device is substantially equivalent to one already legally on the market. It is not a clinical trial, and it is not proof that the device relieves back pain. The FDA classifies non-powered traction apparatus, the HST code that covers inversion tables, as Class I, its lowest-risk class (FDA).
Teeter’s own copy says its tables are “UL Safety-Certified and FDA-Registered as Class I medical devices” (Teeter), while its product pages call them a 510(k) medical device. Both are true: the device type is Class I and this product was cleared through the 510(k) route. The UL certification is the company’s statement; we have not checked it in UL’s own database.
Why Most Other Tables Have No FDA Record
The FDA only regulates inversion tables whose makers claim a medical use, and most makers don’t, so most tables sit outside FDA regulation entirely (Kassay, 2023). The same paper notes that the FDA’s device reporting database lists serious injuries from inversion table therapy, including spinal cord injury, fractures, lacerations and death, without giving a count or a rate. A 510(k) doesn’t make a table safe for everyone. It does mean Teeter chose to make a medical claim and went through the FDA to do it.
On results, the broadest evidence is the Cochrane analysis of 32 traction trials, which found that traction of all kinds makes little or no difference to pain, function or return to work in low-back pain (Wegner, 2013). That covers traction in general, not Teeter or inversion specifically. The narrower, more encouraging data are on our page on what inversion is actually shown to do.
Teeter Warranty and Returns
The warranty is the other place Teeter is clearly ahead of most competitors, and it applies to all four current tables.
The Five-Year Warranty
Teeter includes a five-year full warranty covering repair and replacement of manufacturing defects in materials, workmanship, fabrics and padding, running from the day of retail purchase (Teeter). An extension of a further five years is sold separately. Innova’s tables, for comparison, carry a one-year limited warranty. When a part does need replacing, our page on getting inversion table parts from Teeter and Innova walks through Teeter’s parts request form.
The 90-Day Return Window, and Where It Applies
Bought directly from Teeter, a table returned in original condition within 90 days of delivery is refunded at 100% of the item’s price. A return that is damaged, missing parts or shows obvious use gets up to 50% (Teeter).
Costco sells its own Teeter bundle, the FitSpine FX-3, with different terms again; our guide to the inversion table at Costco compares it with the X3.
When Teeter Isn’t the Right Choice
If You Want Heat and Massage Built In
The FitSpine models have no heat or massage as standard. Teeter’s only heated option is the EP-560 with its cushion, the EP-560V, which is our heat pick in our guide to the best inversion tables. If you want heat built in for less, Innova builds it into three tables at lower price points.
| Spec | Innova ITM4800Mid-range, price tier 2 of 3Maker source | Innova ITM5900Mid-range, price tier 2 of 3Maker source | Innova ITM6000Mid-range, price tier 2 of 3Maker source |
|---|---|---|---|
| Weight capacity | 300 lb | 300 lb | 300 lb |
| Angle control | Six-position pin with protective cover; degrees not stated | Six-position pin with protective cover; degrees not stated | Six-position pin; slope adjustable without dismounting |
| Heat and massage | Heat and vibration on a lumbar band, adjustable position | Vertical heat and massage pad covering the entire spine | Dual pads, one for the neck and one for the back, two heat levels |
| Warranty | 1 year limited | 1 year limited | 1 year limited |
| FDA | Not stated | Not stated | Not stated |
| Buy | Not linked | See today's price: Innova ITM5900 on Amazon (opens in a new tab) | See today's price: Innova ITM6000 on Amazon (opens in a new tab) |
Innova ITM4800Maker source- Weight capacity
- 300 lb
- Angle control
- Six-position pin with protective cover; degrees not stated
- Heat and massage
- Heat and vibration on a lumbar band, adjustable position
- Warranty
- 1 year limited
- FDA
- Not stated
Innova ITM5900Maker source- Weight capacity
- 300 lb
- Angle control
- Six-position pin with protective cover; degrees not stated
- Heat and massage
- Vertical heat and massage pad covering the entire spine
- Warranty
- 1 year limited
- FDA
- Not stated
Innova ITM6000Maker source- Weight capacity
- 300 lb
- Angle control
- Six-position pin; slope adjustable without dismounting
- Heat and massage
- Dual pads, one for the neck and one for the back, two heat levels
- Warranty
- 1 year limited
- FDA
- Not stated
Maker source from the maker's own page or manual, not independently testedListing only retail listing, no maker spec sheetNot stated the maker publishes nothing
The trade is visible in the last two rows: a one-year warranty and no FDA clearance declared. Our Innova buying guide goes through which of the three suits which kind of pain.
If You Weigh More Than 300 lb
Every Teeter table is rated to 300 lb. That used to be the ceiling across the mainstream brands, but it no longer is: Innova publishes a 350 lb capacity for its ITX1200, with a three-position pin and a 4’10” to 6’6” height range (Innova). If you are over 300 lb, no Teeter table is rated for you, and you should not go past a published limit.
If the Budget Comes First
The FitSpine models sit in the premium tier. If price is the deciding factor, our full inversion table comparison covers the cheaper frames that still pass our filters, along with what each one gives up.
If You Have a Condition on Teeter’s Own List
Teeter’s contraindication list, which the company says also appears in the owner’s manual, tells users not to invert until a physician approves if they have high blood pressure, heart or circulatory conditions, glaucoma, a history of retinal detachment, osteoporosis, hernias, severe acid reflux, pregnancy or recent surgery, among others (Teeter). No model upgrade changes that. Our page on who should not use an inversion table sorts that list into what has been measured and what is caution.
A Brief History of Teeter
From Gravity Boots in 1981
Teeter says it began in 1981 as a family business. According to the company, founder Roger Teeter found relief for his own back pain through inversion, and he and his wife Jenny started out with Gravity Boots and a single inversion table (Teeter). That is the company’s own account rather than an independent record, but it is consistent with the FDA file, where gravity boots sit in the same clearance as the table.
Why Teeter Shows Up in So Many Recommendations
Part of the brand’s profile comes from high-profile users. If that is what brought you here, we look at the Joe Rogan question separately in whether Teeter is really the best inversion table. This page sticks to what the specifications and records show.
Find Your Teeter Model
If you would rather answer a few questions than read the whole page, our table finder set to Teeter takes your height, weight, how easy mounting is and whether you want heat, and narrows the range to one or two models. It does not replace a doctor’s approval if you are on Teeter’s contraindication list.
Which Teeter to Buy
Put simply, pick the cheapest Teeter that solves your specific problem, and don’t pay for features you won’t use.
For Most Back Pain Buyers: the X3
If you are new to inversion and want to start shallow and stay there, the X3’s marked angles are the feature that matters. It has everything the LX9 has for angle control and ankle security.
If Getting On and Off Is the Hard Part: the LX9
Choose the LX9 over the X3 only if bending down to your ankles or balancing while you mount is genuinely difficult. The boarding platform is the reason to pay more, and it is the only one.
If You Already Know Your Angle, or Want Heat: the X1 or the EP-560V
The X1 gives you the FitSpine bed and the same warranty and clearance without the marked strap. The EP-560V is the choice if you specifically want Teeter’s heat and vibration cushion.
Whichever you choose, the limits are the same across the range: 300 lb for the tables, a physician’s approval if you are on Teeter’s list, and short sessions to start.
Your questions, answered
Frequently Asked Questions
How much does a Teeter machine cost?
We don't quote dollar figures because Teeter's prices move with sales and retailer. In our product records the FitSpine X1, X3 and LX9 sit in the premium price tier, the EP-560V with its heat cushion in the mid-range tier, and the P2 stretcher and EZ-Up boots in the budget tier. Check the live price on Teeter's site or the retailer before you decide.
How often should you use an inversion table?
Teeter's user guide gives session length, not a frequency: it tells new users to start at 1 to 2 minutes, working up to 3 to 5 minutes, beginning at 20 degrees. Researchers who reported three fall injuries in 2021 advise sessions under one minute. Neither source sets a daily or weekly number, so ask your doctor what suits your condition.
Do Teeter inversion tables really work?
Mechanically, yes: the table holds you at the angle you set so gravity pulls along your spine. Whether that relieves pain is less settled. A Cochrane analysis of 32 traction trials found little or no effect on low-back pain, while a small neurosurgical pilot saw fewer disc operations among inversion users. None of that evidence is specific to the Teeter brand.
Who should not use a Teeter inversion table?
Anyone Teeter itself tells to see a doctor first: people with high blood pressure, heart or circulatory disease, glaucoma or a past retinal detachment, osteoporosis, fractures or orthopedic implants, a hernia, severe reflux, a pregnancy or recent surgery, among other conditions. The list is deliberately broad. It is the maker's caution, and your physician makes the final call.
24 sources used for this guide
Each linked to the original. Citations in the text jump here.
View sources
Teeter. Product sitemap. teeter.com/product-sitemap.xml.
Teeter. FitSpine X1 Inversion Table. teeter.com, product page.
Teeter. EP-560 Inversion Table. teeter.com, product page.
Teeter. Heat & Vibration Comfort Cushion. teeter.com, product page.
Teeter. FitSpine Inversion Tables. teeter.com/fitspine/.
Jung SH, Hwang JM, Kim CH. Inversion Table Fall Injury, the Phantom Menace: Three Case Reports on Cervical Spinal Cord Injury. Healthcare (Basel) 2021;9(5):492.
FDA. 510(k) Premarket Notification K162702: Teeter Manual Inversion Table. U.S. Food and Drug Administration, 510(k) database, decision date December 30, 2016.
FDA. Device classification, product code HST: Apparatus, Traction, Non-Powered. U.S. Food and Drug Administration, device classification database (openFDA), 21 CFR 888.5850.
Teeter. Our Story. teeter.com, About.
Kassay A, Soliman MAR, Jhawar BS. Recommendations for inversion table therapy. Disability and Rehabilitation 2023;45(22):3779-3782.
Wegner I, Widyahening IS, van Tulder MW et al. Traction for low-back pain with or without sciatica. Cochrane Database of Systematic Reviews 2013, CD003010.
Teeter. Return Policy. teeter.com, Return Policy.
Innova. ITX1200 Inversion Table. innovaproductsinc.com, product page.
Teeter. Are there health issues that would prevent me from inverting?. teeter.com, Support Center (the same list appears in the owner's manual).
Teeter. What are the height and weight ratings for the Teeter inversion table? (support center). teeter.com support center.
Teeter. DEX II Commercial Inversion & Core Training System. teeter.com, accessed September 2026.
Teeter. DEX II Inversion & Core Training System: Assembly & User Guide. Owner's manual, label D12010.
Teeter. Inversion Table vs. DEX II: Recline vs. Forward Inversion. teeter.com blog, June 2026.
Teeter (Stl International, Inc.). Gravity Boots & Doorway Inversion Systems (ficha de produto). teeter.com/product/gravity-boots/.
Teeter (Stl International, Inc.). Gravity Boots with Adapter Kit (ficha de produto). teeter.com/product/gravity-boots-adapter-kit/.
Teeter. FitSpine Inversion Tables. teeter.com/fitspine/ (where teeter.com/product/ep-970/ now leads).
Teeter. ComforTrak EP-960 Inversion Table Owner's Manual (E61711, 0217-4, 2017), copy hosted by ManualsLib. Owner's manual, 2017 (copy hosted by ManualsLib).
Teeter. FitSpine LX9 Inversion Table. teeter.com, product page.
Teeter. FitSpine LX9 Inversion Table: User Guide, rev. LX1030 0123-4. teeter.com/wp-content/uploads/2023/02/FitSpine-LX-Series_LX6-LX7-LX8-LX9_OM_LX1030_0123-4.pdf.