Buying guide
Teeter FitSpine LX9 vs X3 vs EP-560: What Changes Between the Three Tables
By the IntoInversion teamUpdated
- 2 picks
- 16 sources
- 8 min read
We earn from qualifying purchases made through our links.


Our pick for most buyers
Teeter FitSpine X3
In the Teeter FitSpine LX9 vs X3 vs EP-560 choice, the X3 is the one most people need. Pay more for the LX9 only if getting into the ankle lock is hard, and choose the EP-560V only if you want the heat cushion in the box. None of the three is shown to treat back pain.
- Marked tether at 20, 40 and 60 degrees
- Extra-long EZ-Reach ankle handle
- Lighter and narrower than the LX9, with the same five-year warranty
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
Maker sourceSpecs from the maker's own product page

Better if getting on is hard
Choose it if bending to your ankles or balancing on one foot is difficult: the LX9 adds a raised boarding platform and an arched frame. Skip it if mounting is easy for you, or space is tight: it is the heaviest and widest of the three.

Better if you want heat
Choose it if you want a heat and vibration cushion with the table from the first session. Skip it if you want marked angles: the EP-560 strap is not marked in degrees.
This comparison is built from Teeter’s own product pages and manuals, line by line. We did not test the tables ourselves. If you buy through our links we may earn a commission, which does not decide which table we pick.
Teeter FitSpine LX9 vs X3 vs EP-560 at a Glance
Teeter’s product sitemap lists four inversion tables today: the FitSpine X1, X3 and LX9, and the EP-560 (Teeter). The three on this page are the ones people cross-shop. They share a rating and a warranty, so the choice is about how you set the angle, how you get in, and whether you want heat.
| Spec | Editor's choice Teeter FitSpine X3Premium, price tier 3 of 3Maker source | Teeter FitSpine LX9Premium, price tier 3 of 3Maker source | Teeter EP-560VPremium, price tier 3 of 3Maker source |
|---|---|---|---|
| Weight capacity | 300 lb | 300 lb | 300 lb |
| User height | 4'8" to 6'6" | 4'8" to 6'6" | 4'8" to 6'6" |
| Angle control | EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout | EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout | Angle tether, degrees not stated; full inversion with secure lockout |
| Ankle system | Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure | Deluxe EZ-Reach ankle lock with Ankle Comfort Dial | Ergo-Embrace wrap-around ankle cups, spring-loaded T-pin closure, Ankle Comfort Dial |
| Heat and massage | None | None | Removable Heat & Vibration Comfort Cushion included: six vibration motors, two vibration levels, heat with a 20-minute auto shut-off, mains adapter |
| Warranty | 5 years (extension to 10 sold separately) | 5 years (extension to 10 sold separately) | 5 years on the table; the heat cushion has its own 1-year warranty |
| FDA | 510(k) cleared (K162702), Class I device | 510(k) cleared (K162702), Class I device | 510(k) cleared (K162702), Class I device |
| Assembly and setup | 85% pre-assembled, BILT app instructions (brand-wide claim) | 85% pre-assembled, BILT app instructions (brand-wide claim) | BILT app 3D assembly instructions |
| Buy | See today's price: Teeter FitSpine X3 on Amazon (opens in a new tab) | See today's price: Teeter FitSpine LX9 on Amazon (opens in a new tab) | Not linked |
Editor's choiceTeeter FitSpine X3Maker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- 85% pre-assembled, BILT app instructions (brand-wide claim)
Teeter FitSpine LX9Maker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock with Ankle Comfort Dial
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- 85% pre-assembled, BILT app instructions (brand-wide claim)
Teeter EP-560VMaker source- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- Angle tether, degrees not stated; full inversion with secure lockout
- Ankle system
- Ergo-Embrace wrap-around ankle cups, spring-loaded T-pin closure, Ankle Comfort Dial
- Heat and massage
- Removable Heat & Vibration Comfort Cushion included: six vibration motors, two vibration levels, heat with a 20-minute auto shut-off, mains adapter
- Warranty
- 5 years on the table; the heat cushion has its own 1-year warranty
- FDA
- 510(k) cleared (K162702), Class I device
- Assembly and setup
- BILT app 3D assembly instructions
Maker source from the maker's own page or manual, not independently testedListing only retail listing, no maker spec sheetNot stated the maker publishes nothing
Size and Weight
Teeter publishes four sets of dimensions for each table, and they are the numbers that most separate the three (Teeter) (Teeter) (Teeter).
| Teeter publishes | X3 | LX9 | EP-560 |
|---|---|---|---|
| Weight of the table | 65.8 lb | 73.6 lb | 59.0 lb |
| In use, at full inversion (L x W x H) | 81.0 x 28.8 x 86.5 in | 81.7 x 32.0 x 86.5 in | 84.0 x 28.8 x 86.0 in |
| Upright, not in use (L x W x H) | 58.0 x 28.8 x 60.5 in | 63.2 x 32.0 x 60.0 in | 60.0 x 28.8 x 58.5 in |
| Folded for storage (L x W x H) | 20.0 x 28.8 x 66.0 in | 22.1 x 32.0 x 67.4 in | 20.0 x 28.8 x 66.0 in |
| Shipping box (L x W x H) | 49.2 x 29.9 x 8.3 in | 49.0 x 29.0 x 9.5 in | 48.5 x 30.0 x 8.9 in |
Three things stand out. The X3 and EP-560 fold to the same footprint, while the LX9 needs 3.2 inches more width in every position. The EP-560 is the longest in use, at 84.0 inches, even though it is the lightest. And at full inversion each table stands about 86 inches tall, so check the ceiling as well as the floor, even if you plan to stay at a shallow angle.
The LX9 figures above come from its product page. Teeter’s LX series assembly manual covers six models with one specification table and gives different numbers, including a 27.5 inch width, so measure with a tape before you commit (Teeter, 2023).
What All Three Share
Capacity, height range, warranty term and clearance are the same across the three (Teeter) (Teeter). So are the Ergo-Embrace ankle supports, the Ankle Comfort Dial with a high and a low setting, the 3-setting Roller Hinge, full inversion with a secure lockout, the Lumbar Bridge, the Acupressure Nodes and the headrest pillow. All three can take a five-year warranty extension, sold separately.
On the EP-560 page, a Teeter product expert says the 300 lb limit is given “at a 400% safety rating” and that the weight range starts at 89 lb (Teeter). Teeter publishes no failure data for these tables, so equal ratings do not tell you which one is stronger. That leaves four real differences: the angle strap, the ankle closure, the way you get in, and the heat cushion.
Teeter FitSpine X3 vs LX9
These two are closest. Both use the FlexTech backrest on an 8-point Floating Suspension, the same marked tether and the same Deluxe EZ-Reach ankle system (Teeter) (Teeter).
What the LX9 Adds
The LX9 adds an arched LX Ergonomic Frame, a Raised Boarding Platform that Teeter says makes stepping into the ankle lock easier, and a Storage Caddy for a water bottle, a phone or the nodes (Teeter). Its box also includes a holder for the Acupressure Nodes. The platform and frame serve one moment of the session: stepping in and locking your ankles.
What It Costs You
The LX9 is 7.8 lb heavier than the X3 and 3.2 inches wider, and it folds to a larger shape. If you fold the table away every day, that matters. If it stays set up in a spare room, it matters less. Our full Teeter LX9 breakdown goes through its manual line by line.
Teeter FitSpine X3 vs EP-560
The EP-560 belongs to Teeter’s ComforTrak series rather than the FitSpine range, and the gap between these two is wider than the gap between the X3 and the LX9.
The Angle Strap
The X3’s EZ-Angle tether has embroidered marks at 20, 40 and 60 degrees (Teeter). The EP-560 has an angle tether that sets a limit for partial inversion, with no degree marks on its page (Teeter). You adjust it, lie back and find where it stops. With a marked strap you can choose a shallow setting before you get on, and two people sharing a table can each return to their own mark.
The marks are settings the equipment offers, not a recommended progression. Follow the current manual and any limit your clinician gives you.
The Ankle Closure
The X3’s Deluxe EZ-Reach system has an extra-long handle and a micro-adjusting closure, which Teeter says reduces the need to bend forward (Teeter). The EP-560 uses a spring-loaded, T-shaped closure (Teeter). Teeter publishes no failure data for either, so we cannot call one safer. What the long handle changes is how far you reach.
The Backrest
The X3 has the FlexTech backrest on Floating Suspension, and the EP-560 has the ComforTrak backrest. Teeter’s wording will not settle this one: both pages say the backrest “deepens your stretch more than any other inversion table” (Teeter) (Teeter). Both cannot be a measurement, and we found no published test comparing the two beds, so we do not rank them. Our Teeter EP-560 page has more on the ComforTrak table.
The Weight
The EP-560 is about 7 lb lighter than the X3, which helps if you fold and move it often. Neither that nor the backrest changes who should or should not invert.
EP-560 vs EP-560V: The Heat Cushion
The two names cause a lot of confusion, and the answer is simple: they are the same table. Teeter sells the standard EP-560 as item E61006FB and the version with a Heat and Vibration Comfort Cushion as item E61006FBV (Teeter). The EP-560V is the version we link to on this page.
What the Cushion Adds
Teeter lists six vibration motors with two intensity levels, and heat that is controlled separately and shuts off after 20 minutes (Teeter). The cushion weighs about 2.3 lb, attaches with four nodes and runs from a mains power adapter. Teeter publishes vibration levels but no heat levels or temperature.
The Warranty Is Shorter
The cushion’s own page gives it a one-year warranty, while the five years on the EP-560 page cover the table (Teeter). The EP-560 page does not say whether a cushion in the bundle inherits the longer term, so plan on one year and keep the receipt.
Heat Is Not Exclusive to the EP-560
Teeter sells the cushion separately in two versions. The FitSpine version fits the X1, X3 and LX9 among others, and the EP-Series version fits the EP-560 (Teeter). So you can buy an X3 now and add heat later. The EP-560V is the simpler purchase rather than the only route, and it has usually cost less than the X3. Check the live price on the button, because it moves.
Which Teeter Should You Buy?
With the specifications set aside, the choice comes down to your body, your room and whether you want heat.
By Situation
- You have no special need: the X3.
- Stepping into the lock is hard: the LX9.
- Someone in your household has limited mobility: the LX9, even if you find mounting easy yourself.
- You want heat in the box and an unmarked strap does not bother you: the EP-560V.
- You move the table often: the EP-560V is the lightest and the LX9 the heaviest.
- You weigh over 300 lb: none of the three. Read our guide to tables for big, tall and heavier users.

Long ankle-lock handle, 5-year warrantyMaker source
by TEETER
Best for buyers who want a marked tether and an ankle lock they can close without bending far.
Skip it if you weigh over 300 lb or want heat without buying a separate cushion.
What the premium over a cheaper table buys is the longer ankle-lock handle, the 5-year warranty against Innova's 1 year, and a tether marked at 20°, 40° and 60°. The Innova ITX9600 also lets you set a limit with a pin whose degrees are listed in its manual, so a marked angle is not exclusive to Teeter.
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
What we like
- Tether marked at 20°, 40° and 60°, set before you get on
- Five-year full warranty, against Innova's one year
- Teeter's tables are FDA 510(k) cleared under K162702
- EZ-Reach ankle lock with an extra-long handle
Keep in mind
- No heat or massage
- No raised boarding platform, unlike the LX9
- Rated to 300 lb, max height 6 ft 6 in
Full specs
- Price range
- Premium
- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock, extra-long handle, micro-adjusting closure
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
Maker sourceFrom the maker's product page. Not stated means the maker publishes nothing.
We may earn a commission. It never changes what we pick, or the order picks appear in.

Raised boarding platformMaker source
by TEETER
Best for people who find bending to their ankles or balancing on one foot hard.
Skip it if you can mount the table easily, or floor space is tight.
Same angle system as the X3, plus a boarding platform with an arched frame. Worth the step up only if getting on and off the table is the hard part for you.
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
What we like
- Raised boarding platform and arched frame for getting on and off
- Same 20°, 40° and 60° marked tether as the X3
- Five-year full warranty, with a five-year extension sold separately
- Ships with a Storage Caddy and traction handles on the hinges
Keep in mind
- Otherwise identical to the X3, so you pay for the platform
- Roller hinge setting must match your body weight, per the manual
- No heat or massage
- Rated to 300 lb, max height 6 ft 6 in
Full specs
- Price range
- Premium
- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- EZ-Angle tether marked at 20°, 40° and 60°; full inversion with secure lockout
- Ankle system
- Deluxe EZ-Reach ankle lock with Ankle Comfort Dial
- Heat and massage
- None
- Warranty
- 5 years (extension to 10 sold separately)
- FDA
- 510(k) cleared (K162702), Class I device
Maker sourceFrom the maker's product page. Not stated means the maker publishes nothing.
We may earn a commission. It never changes what we pick, or the order picks appear in.

Heat cushion on a five-year tableMaker source
by TEETER
Best for buyers who want a heat and vibration cushion with the table.
Skip it if you want angles marked in degrees.
Heat and vibration on a cushion that covers the backrest, on a table with Teeter's five-year frame warranty and 510(k) clearance. The cushion itself carries one year, the same as Innova's heat tables, so the extra money buys the table, not a longer warranty on the heat.
- Weight limit
- 300 lb
- User height
- 4'8" to 6'6"
- Warranty
- 5 years
- Price range
- Premium
What we like
- Heat and six-motor vibration cushion included, and it comes off when you want a firm backrest
- Five-year full warranty on the table, against one year on Innova's
- Teeter's tables are FDA 510(k) cleared under K162702
- Rated to 300 lb, for users 4 ft 8 in to 6 ft 6 in
Keep in mind
- The heat cushion carries only a one-year warranty
- Teeter publishes vibration levels but no heat levels
- Tether angles are not marked in degrees, unlike the X3 and LX9
- Costs more than Innova's built-in heat tables
We are not linking to this model at the moment. The specs below still hold. See the alternatives we would pick instead.
Full specs
- Price range
- Premium
- Weight capacity
- 300 lb
- User height
- 4'8" to 6'6"
- Angle control
- Angle tether, degrees not stated; full inversion with secure lockout
- Ankle system
- Ergo-Embrace wrap-around ankle cups, spring-loaded T-pin closure, Ankle Comfort Dial
- Heat and massage
- Removable Heat & Vibration Comfort Cushion included: six vibration motors, two vibration levels, heat with a 20-minute auto shut-off, mains adapter
- Warranty
- 5 years on the table; the heat cushion has its own 1-year warranty
- FDA
- 510(k) cleared (K162702), Class I device
Maker sourceFrom the maker's product page. Not stated means the maker publishes nothing.
What the FDA Clearance Does and Does Not Mean
All three pages describe a medical device “indicated for 10 back pain conditions”. That is Teeter’s wording for intended use. The clearance behind it, 510(k) K162702, names a “Teeter Manual Inversion Table,” not each model (FDA, 2016). The device type sits in Class I, the FDA’s lowest-risk class (FDA). A 510(k) is an equivalence review, not a trial showing a table relieves pain, so the clearance gives you no reason to prefer one of these three over another.
What the Research Says About Relief
A Cochrane review of 32 trials with 2,762 people found that traction of any kind makes little or no difference to pain, function or return to work in low back pain (Wegner, 2013). That covers traction in general, not inversion or Teeter specifically.
The more encouraging inversion data come from a 2021 registry in which 74% of patients (49 of 66) reported less pain at follow-up (Mendelow, 2021). It had no control group, and Teeter supplied the tables and funded the study’s administrator, though the authors state the analysis was independent. Buy for comfort and fit, not for a promised result.
Using Any of Them Safely
No feature on this page makes the head-down position itself safer, so the same precautions apply to all three.
Start Short and Shallow
Teeter’s advice is to begin with one to two minutes per session and advance only as you feel comfortable (Teeter, 2014). The authors who reported three cervical spinal cord injuries from inversion table falls in 2021 recommended staying under one minute (Jung, 2021). Pick the shorter number while you are learning.
Set the Roller Hinge
All three tables have a 3-setting Roller Hinge that changes how readily the bed turns. Teeter’s LX series manual ties the hole to your body weight and says not to use hole A, the most responsive one, for users over 220 lb (Teeter, 2023). That manual covers the LX family, so on the X3 or EP-560 follow the manual that came with your table.
Who Should Not Use Them
Teeter says not to use its inversion products until a licensed physician approves if you have any condition on its list, which includes high blood pressure, glaucoma, retinal detachment, osteoporosis, fractures, hernia, severe acid reflux, pregnancy and recent surgery (Teeter). Part of that rests on measurements: two minutes of inversion raised blood pressure significantly in a study of 60 healthy women (Haskvitz, 1986), and five minutes fully inverted took eye pressure from 16.8 to 32.9 mmHg in healthy eyes (Weinreb, 1984).
Returns
Bought from Teeter, a table in original condition can go back within 90 days of delivery for a full refund, and up to 50% applies to one that is used or damaged. You pay the return shipping, which is worth weighing on a box this heavy. On Amazon, Amazon’s policy applies (Teeter). Not sure Teeter is the right brand? See our Teeter inversion table reviews and the X3 review.
Your questions, answered
Frequently Asked Questions
What are the differences between Teeter inversion tables?
Among these three, the differences are how you set the angle, how you close the ankle lock, how you board, and whether heat comes in the box. The X3 and LX9 have marked tethers and the EZ-Reach lock, the LX9 adds a boarding platform, and the EP-560V adds a cushion. Capacity and warranty match.
What are the key differences between the Fitspine X3 and LX9 machines?
The LX9 adds an arched frame, a raised boarding platform and a storage caddy, and that is the whole list. In return it weighs 7.8 lb more and stands 3.2 inches wider. The bed, tether, ankle lock, roller hinge and 300 lb rating match, so the decision comes down to how easily you get on.
How much weight can a Teeter inversion table hold?
Teeter rates all three for users up to 300 lb, and for heights from 4 ft 8 in to 6 ft 6 in. A product expert on the EP-560 page quotes a working range that starts at 89 lb. Above 300 lb none of these is rated for you, so look at another brand.
Which Teeter inversion table is considered the best?
There is no independent ranking to lean on, but for most first-time buyers we would start with the X3, because the strap is marked and the ankle handle is long. If bending or balancing is hard, the LX9 is the better fit. Whichever you choose, get a doctor's approval first if Teeter's list applies.
Do Teeter inversion tables really work?
As machines, yes: they hold you at the angle you set. As a back pain treatment, that is unproven. The FDA clearance behind them is an equivalence review, not a clinical trial, and no controlled trial we found shows lasting relief. Some people find the stretch comfortable, so treat a table as comfort equipment.
What are the downsides of using a Teeter inversion table?
Going head-down raises blood pressure and eye pressure, and a fall from the ankles can cause serious injury, which is why Teeter lists conditions that need a physician's approval. Across these three tables, the practical downsides also include their size, their weight and a return you pay to ship yourself.
16 sources used for this guide
Each linked to the original. Citations in the text jump here.
View sources
Teeter. FitSpine X3 Inversion Table. teeter.com, product page.
Teeter. FitSpine LX9 Inversion Table. teeter.com, product page.
Teeter. EP-560 Inversion Table. teeter.com, product page.
Teeter. Heat & Vibration Comfort Cushion. teeter.com, product page.
Teeter. Product sitemap. teeter.com/product-sitemap.xml.
Teeter. Assemble Your FitSpine LX Inversion Table: Assembly Instructions (models LX4 to LX9), rev. LX1040B 0123-0. teeter.com/wp-content/uploads/2023/03/FitSpine-LX-Series_Assembly-Instructions_LX4-thru-LX9_LX1040B_0123-0.pdf.
FDA. 510(k) Premarket Notification K162702: Teeter Manual Inversion Table. U.S. Food and Drug Administration, 510(k) database, decision date December 30, 2016.
FDA. Device classification, product code HST: Apparatus, Traction, Non-Powered. U.S. Food and Drug Administration, device classification database (openFDA), 21 CFR 888.5850.
Teeter. Return Policy. teeter.com, Return Policy.
Teeter. FAQ: Invert How Long And How Often?. teeter.com blog, 2014 (updated 2025).
Teeter. Are there health issues that would prevent me from inverting?. teeter.com, Support Center (the same list appears in the owner's manual).
Jung SH, Hwang JM, Kim CH. Inversion Table Fall Injury, the Phantom Menace: Three Case Reports on Cervical Spinal Cord Injury. Healthcare (Basel) 2021;9(5):492.
Mendelow AD, Gregson BA, Mitchell P et al. Lumbar disc disease: the effect of inversion on clinical symptoms and a comparison of the rate of surgery after inversion therapy with the rate of surgery in neurosurgery controls. Journal of Physical Therapy Science 2021;33(11):801-808.
Wegner I, Widyahening IS, van Tulder MW et al. Traction for low-back pain with or without sciatica. Cochrane Database of Systematic Reviews 2013, CD003010.
Haskvitz EM, Hanten WP. Blood pressure response to inversion traction. Physical Therapy 1986;66(9):1361-1364.
Weinreb RN, Cook J, Friberg TR. Effect of inverted body position on intraocular pressure. American Journal of Ophthalmology 1984;98(6):784-787.